Close

quad lock desk mount

Quad Lock

Quad Lock

Quad Lock Smartphone Case and Mount | Gear Review

The smartphone has become the ubiquitous device, offering us with various options for communication, accessibility to Internet, a camera, an GPS and more. Mounting a smartphone to your bike allows you to make use of it for navigation as well as audio prompts, music and calls, if it’s connected with an Bluetooth headphone communicator.

Mounts are like mousetraps. Everyone has tried to build the best one. There’s a wide variety of mounting solutions, many of which can be attached to the handlebars on motorcycles, and a broad selection of phone cradles.

The cradle is an essential component of the design, as getting a phone to break loose and roll around on the freeway at 70 mph can be a heartbreaking experience and costly and unreliable. One of our staff members a few years ago and I’ve been wary of smartphone mounts since then.

Quad Lock is an Australian business that has come up with an extremely easy and simple mounting system.

It all starts with starting with Quad Smartphone case, which is made of tough soft, yet grippy polycarbonate. It has a shock-absorbing , edge-to-edge design. The side of the case you will find an elevated dual-stage lock that Quad Lock says is strong enough to carry 160lbs.

The rim of the locking has four cutouts which match the four tabs that are on the outer edges of the mount. Place the phone in your mount so that tabs are able to fit inside the cutouts. Move the phone either left or right until tabs slide down under the rims of the lock until it clicks into its place.

Now, the phone is safe. To remove it, push down on the blue lever, and then turn by a few degrees until you feel the phone comes out.

Installing the Quad Lock handlebar mounting took just a few minutes with the included Hex wrench. After a few hours of practice, locking the phone to the mount and releasing it again became second-nature and, once the phone is locked, it can be turned 90 degrees to change its orientation to both horizontal and vertical.

When I was riding my iPhone XS in the Quad Lock mount, it did not vibrate and when I used my hands to shake the phone, it never budged. To operate the phone’s touchscreen (when stopped obviously), you may need gloves that can be used with touchscreens.

Quad Lock mount is Quad Lock mounting is lightweight thin, compact, and hardly noticeable when it is not being used. The black-only case is available to fit a variety options of Apple iPhone, Google Pixel and Samsung Galaxy models. A motor mount kit which includes the handlebar mount, the case as well as a waterproof “poncho” cover costs $79.90. The kit with a mirror mount is $69.90 or a fork-mounted mount is $89.90. Once you have an Quad Lock case, you will find mounts for your bicycle belt, arm (for exercise) or desk or tripod, and one-inch ball adapters.

Solutions for smartphone mounting

Since Melbourne, Australia, come innovative, multi-functional solutions for smartphone mounting on scooters or motorbikes. products from Quad Lock. Since 2011 this Quad Lock name has stood as a premium, sturdy practical and functional covers, holders and adapters that allow mounting smartphones.

The one here is compatible with other. Quad Lock uses the concept of a system that uses a patented two-stage locking mechanism. It is available in a variety of. Different holders in vehicles (e.g. on the handlebars, the handlebar’s head, or mirror arm) “work” together with the adapter to connect them to the tablet, smartphone and mobile phones.

There are also covers for weather protection as well as vibration dampers and other accessories. The use of premium materials like stainless steel and glass fiber-reinforced nylon, high functionality, and consistently thought-out, user-friendly handling have been the key factors that have made the Quad Lock brand very popular.

HOW DOES IT WORK?

The Vibration Dampener comes with a dual-chassis suspension system, which is engineered with precision silicone grommets, the Vibration Dampener absorbs vibrations to protect your smartphone’s camera from high-frequency vibrations.

All compatible with Quad Lock motorcycle mounts Quad Lock Ball Adaptor Quad Lock Motorcycle USB Charger, along with the Quad Lock Weatherproof Wireless charger the Quad Lock Vibration Dampener reduces over 90 percent of high-frequency rumbles generated by motorcycles.

Quad Lock: A smartphone-mounting solution designed using 3D printing

With features such as numerous lenses, picture stabilization and advanced software, modern smartphones can create photos comparable to those of professional cameras.

Because of the extreme levels of vibration, however videos and photos taken with a smartphone while riding a motorbike aren’t likely to have this quality – not even to consider the risks that could be posed by phones that aren’t securely secured when engaged in such occasions.

The company based in Melbourne Quad Lock off on a mission to create a system that can keep smartphones secure and protected while maintaining high-end photographic quality.

The results of the mission? The Quad Lock Vibration Dampener is a mount for motorcycles that can stabilize and protects smartphones. It is equipped with a dual chassis suspension system that has precision-engineered silicon grommets, which absorb vibrations, reducing more than 90% of high-frequency vibrating generated by motorcycles.

Designing the Quad Lock Vibration Dampener

For the Quad Lock project, the first process in creating this Quad Lock Vibration Dampener was to create an instrument that can repeatedly replicate the actual vibrations of motorcycles. To accomplish this the team examined riders’ behavior along with patterns of riding and worked with leading vibration experts to develop a testing method.

This was a method that enabled users of Quad Lock staff to develop designs that targeted specific frequencies. The final product, which was known as the Quad Lock Vibration Dampener was put through rigorous testing of its performance, and the final design was thoroughly tested by its end-users.

Overcoming validation challenges

For the purpose of gathering feedback and then quickly integrate it into design iterations This meant that the Quad Lock team needed to create physical parts that could be used in test rigs and real-world applications. They also opened the doorway to 3D printing technology , particularly the Ultimaker S3, Ultimaker 3, and Ultimaker 2+.

This Quad Lock Thailand Vibration Dampener’s development process was comprised of two main phases: rapid concept development and testing in the real world. More than 100 iterations of the design were created and tested for each factor including the effects of dimensional changes as well as clearances and durometers.

The high turnover rate enabled the team to get feedback, take it into consideration, and come up with the next at the lowest cost and as quickly as possible – with multiple variations sometimes produced in the span of one day.

The designs were sturdy enough to withstand many hours of testing using the vibration test equipment, from which the team gathered important feedback and information. This kept the team’s motivation and morale high and helped them improve their production process, saving time and costs.

A fully embedded design process

Nowadays, Quad Lock’s production facility is responsible for products distributed to millions of international customers. The technology of additive manufacturing is now fully integrated into Quad Lock’s design, prototyping, and production procedures. This is a huge benefit for the company as it broadens its product line and mounting solutions for automobiles, runners, even the walls of interiors of houses or office buildings.

Leave a Reply

Your email address will not be published.

0 Comments
scroll to top